decor 590 EdgeFast™ Atria Blackout Blind
The decor 590 is the tensioned horizontal version of the highly capable decor 570 blackout blind. The fabric is held captively in the side channels by the EdgeFast™ retention strip, meaning that it will span much larger openings than conventional blackout blind systems. The system has a cassette at each end of the side channels , one contains the fabric roller and the other contains the tensioning cable recoil units.
Resources
Projects
240v AC motor with hard wired control circuit as standard for ultimate reliability.
240v AC motor with hand held or wall mounted wireless control minimises the amount of cabling, making it ideal for retro-fit situations.
An option for smaller blinds within easy reach, the Revoshaft™ gear operation is a simple solution available with either fixed or detachable handle.
Mounting Options
The most common scenario for roof lights, north lights, glazed lanterns and atria, the blind is fixed to the sides of the reveal or recess. Unless the recess is perfectly square, we recommend fixing a shelf at each side to sit the headbox on.
For situations where the recess is not deep enough to mount the blind, the decor 590 can be face fixed to the ceiling.
Pockets formed in the skylight recess sides can be used to conceal the blind when it is open. The pockets should be a minimum of 20mm taller than the casette height and 60mm deeper on one side to ensure there is adequate room for installation and maintenance.
Hardware Finishes
Clean and clinical
Colourful and coordinated.
Configuration
For extra long openings, the fabric can draw from both ends to the centre. An additional cassette mounted above the fabric cassettes contains the tension cable recoil units.
Blind draws vertically upwards from the bottom.